羞羞答答xxdd影院欧美_97色伦色在线综合视频_亚洲巨乳在线_亚洲伊人久久大香线蕉苏妲己

MICROSTAR 15 control 懸臂攪拌器

The first compact and high-performance overhead stirrers with lifetime warranty. Suitable for low viscosities (750 - 8000mPas) and volumes (2-25l). A microprocessor-controlled operation keeps the speed range constant, depending on the model from 0/30 - 500/2000 rpm. Actual and set speed can be adjusted continously. The speed will remain constant even with changing viscosities. A torque trend measurement will show any changes in viscosities of the sample. An electronic safety circuit as well as a state-of-the-art vibration detection guarantees the stirrer to stop when an anomaly is detected. Operating and documenting all parameters, as well as updating the latest firmware are possible by the USB interface.

  • 品牌: IKA
  • 型號: MICROSTAR 15 control
  • 其他型號:
最大攪拌量 (H2O)10 l
電機輸入功率32 W
電機輸出功率22 W
電機原理無碳刷直流馬達
轉速顯示LCD
最小轉速30 rpm
最小轉速0/30 rpm
最大轉速1000 rpm
轉動可逆方向
間歇運行
最大粘度8000 mPas
攪拌軸最大輸出功率15.7 W
允許連續運轉時間100 %
攪拌軸最大轉矩15 Ncm
在60轉時,攪拌軸最大轉矩(過載)15 Ncm
在100轉時,攪拌軸最大轉矩15 Ncm
在1000轉時,攪拌軸最大轉矩15 Ncm
最大扭矩 I15 Ncm
速度范圍 I (50 Hz)30 - 1000 rpm
速度范圍 I (60 Hz)30 - 1000 rpm
轉速控制Turning knob
轉速設置精度1 ±rpm
n > 300rpm時速度測量偏差1 ±%
n < 300rpm時速度測量偏差3 ±rpm
攪拌槳固定轉夾頭
外接溫度傳感器接口PT1000
溫度顯示
轉夾頭夾持范圍最小直徑0.5 mm
轉夾頭夾持范圍最大直徑8 mm
空心軸,內徑8.5 mm
空心軸(停止狀態可插入)
支架固定延長臂夾頭固定
延長臂直徑13 mm
延長臂長度160 mm
轉矩顯示
Speed control電子的
額定轉矩0.15 Nm
轉矩測量趨勢
扭矩測量偏差 I3 ±Ncm
計時器
計時器顯示LCD
時間設置范圍0 - 6000 min
最小溫度范圍-10 °C
最大溫度范圍350 °C
溫度測量精度0.1 K
溫度測量精確性PT1000溫度偏差±0.5(DIN IEC 751 Class A) K
溫度傳感器極限偏差≤ ± (0.15 + 0.002xITI) K
外殼材質鑄鋁涂層 / 熱塑性聚合物
潔凈室要求
防爆要求
最長遙控距離(取決于建筑物)150 m
外形尺寸60 x 123 x 110 mm
重量1.26 kg
允許環境溫度5 - 40 °C
允許相對濕度80 %
DIN EN 60529 保護方式IP 54
RS 232接口
USB接口
模擬輸出
電壓100 - 240 V
頻率50/60 Hz
儀器輸入功率32 W
直流電壓24 V=
電流消耗1300 mA


The first compact and high-performance overhead stirrers with lifetime warranty. Suitable for low viscosities (750 - 8000mPas) and volumes (2-25l). A microprocessor-controlled operation keeps the speed range constant, depending on the model from 0/30 - 500/2000 rpm. Actual and set speed can be adjusted continously. The speed will remain constant even with changing viscosities. A torque trend measurement will show any changes in viscosities of the sample. An electronic safety circuit as well as a state-of-the-art vibration detection guarantees the stirrer to stop when an anomaly is detected. Operating and documenting all parameters, as well as updating the latest firmware are possible by the USB interface. 

Chemically resitant housing 
Display with glass surface 
Clear LCD display 
Adjustable vibration detection 
PT 1000 temperature sensor connector 
Lock key 
Timer and counter function 
Compact footprint 
USB interface 
Lifetime warranty